New Balance NB447 Headphones User Manual


 
Using Your New Balance Sport Ear Buds with Foldable Head Band
Your New Balance Ear Buds feature a foldable headband for compact storage. Unfold the headband
completely, place it over your head and insert the “L” ear bud in your left ear and the “R” ear bud in your
right ear. Adjust the length of the headband for the most comfortable and secure fit.
Your New Balance Sport Ear Buds were designed with a modular cord
system. We have provided a 15” iPod/iPhone control cable that is
suitable if your music player will be worn in an armband or clipped to your
clothing at chest level. We have also provided a 36” cable that is suitable
if your music player will be clipped to your belt, placed in your pocket or
carried in a fanny-pack. You may connect both cables together in case
you want to control your iPod or iPhone and the 15” cable is not long
enough.
Connect the male headphone plug of the ear buds to the female headphone jack of either the 15” or 36”
headphone cable depending on your wearing preference. Then connect the male headphone plug of the
15” or 36” cable to the headphone jack of your music player. Be sure that the plugs are fully inserted into
the jacks. If the plug is not fully inserted you may only hear sound from one earpiece.
Using the iPod/iPhone Control Cable
Connect the 15” iPod/iPhone cable between your headphones and your iPod/iPhone to perform the
following operations with the remote controller mounted on the cable:
Model: NB447
Using the Accessory Cord Winder Clip
Your New Balance Ear Buds are also supplied with a cord winder clip that may be used to eliminate excess
slack in the 36” cable if necessary. If you find that that the 36” cable is too long you can store up to 24” of
cable in the cord winder and then clip the cord winder to your clothing.
Sport Ear Buds with
Modular Cord System
NB464-071410-A
Printed in China
New Balance Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants
this product to be free from defects in workmanship and materials, under normal use and conditions, for a period
of 2 years from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was
originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or
malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product
without charge (except for a $2.00 charge for handling, packing, return UPS/postage, and insurance). This decision
is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center
listed below. The product must include proof of purchase, including date of purchase. The fee for service without
proof of purchase is $4.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as
exhausted or defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if
within the warranty period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $2.00 ($4.00 without
proof of purchase).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not
cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have
been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive
heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product
to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other
than to the original purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their
officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or
incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations
on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of
warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit
card) for purchase of your SDI Technologies product.
© 2010 SDI Technologies, Inc. All rights reserved
Questions? Visit www.newbalanceaudio.com or
call 1-800-288-2792 Toll Free.
Limited 2 Year Warranty
Using the Water Resistant Connection Cover
Your New Balance Ear Buds are also supplied with a silicon sleeve that can be used to cover the
connection between the male headphone plug on the Ear Buds and the female headphone jack on the 15”
or 36” cable. Use this connection cover if you routinely use your Ear Buds in extremely wet or damp
conditions.
Stretch the connection cover over the plug of the Ear Buds as shown.
After connecting the male plug of the Ear Buds to the female jack on the
15” or 36” cable. Slide the connection cover down so that it completely
covers the plug and jack connection point to seal out excess moisture.
Safety Information
To protect your hearing, always start listening with the Volume Control of
your music player set to a low level and gradually increase the volume to
a comfortable listening level.
IMPORTANT! Listening at high volume for long periods of time can result
in long-term hearing damage. For your safety, do not use headphones if
they would prevent you from hearing warning sounds, such as while
driving a car or motorcycle, riding a bike, etc.
NOTE: In extremely cold or dry air conditions you may notice a slight
‘tingling’ feeling in your ears when using in-ear headphones. This is the
result of the build-up of static electricity in your body. This is normal and
not an indication of any problem with your headphones.
Authorized Licensee of New Balance Athletic Shoe, Inc.
New Balance and Flying NB are registered
trademarks of New Balance Athletic Shoe, Inc
To Do This Action Required
Activate voice control* Depress the Master Control for 2 seconds
Answer or end a call Press the Master Control once to answer call
Press the Master Control again to end call
Ignore an incoming call Depress the Master Control for 2 seconds
Answer a second incoming call Press the Master Control once to answer second call
and place original call on hold Press the Master Control again to return to first call
Answer a second incoming call, Depress the Master Control for 2 seconds
and end original call 2 low tones will confirm end of original call.
Switch between two calls Press the Master Control once to switch between calls
Play or Pause Press Master Control once to Play, again to Pause
Skip Track or Chapter Forward Press Master Control 2 times quickly
Skip Track or Chapter Back Press Master Control 3 times quickly
Increase Volume Press the "+" button
Decrease Volume Press the " - " button
Activate VoiceOver** Press and hold the Master Control to hear title and
artist of currently playing song
Navigate Playlists using VoiceOver** Press and hold the Master Control until tone is heard,
then release. When the name of the desired playlist is
heard, press the Master Control once to select it.
Click to Increase
Volume
Click x2 for Next Track
Click x3 for Previous Track
Press + Hold for iPod
Shuffle VoiceOver
Click to Decrease
Volume
Click to Play/Pause
Master Control
close the cord winder
wrap cord clockwise around the
spool to reach desired length
open the cord winder
using the small tab
under the clip
pass the plug down
and through the cover
clip it on and go!
wind over
20 inches!
pull the cord back up
and over the spool