NAD PP-2 Stereo Amplifier User Manual


 
100mA
24VDC
Many of today's stereo and AV amplifiers and receivers have either eliminated
the phonograph input altogether, or included a low cost - and low
performance - circuit for attaching your turntable. The PP 2 offers superb
performance in a neat and simple package for a very reasonable cost. The
NAD PP 2 is a vastly improved successor to the very popular PP 1, arguably the
most successful device of its kind. The most obvious visible difference is the
inclusion of a high gain Moving Coil Cartridge input allowing proper matching
to virtually any high quality turntable/cartridge combination. Other refine-
ments include a grounding terminal post, and gold plated input and output
sockets.
The performance of the PP 1 was already to a very high standard in the areas
of noise, distortion, and RIAA equalization accuracy, but we have managed to
improve these specifications still further by careful circuit layout and improved
close tolerance parts. Costly metal film resistors and film type capacitors are
used exclusively in the signal path to give both measured improvement and a
more refined and engaging listening experience. By increasing the power sup-
ply voltage from 15 volts to 24 volts, we have improved overload margins and
enhanced musical dynamics.
By staying with the original PP 1 concept, and improving functionality and per-
formance even further, NAD's engineering team has once again managed to
give music lovers an even better product at a truly amazing price.
• Selectable MM and MC Phono Stage • External 24 volt Power Supply • Gold Plated Sockets
• Close Tolerance High Quality Components • LED Power Indicator
PP-2 Phono Pre-Amplifier
SPECIFICATIONS MC MM
Input impedance (R and C) 100+ 180pF 47k+ 200pF
Gain at 1kHz 60dB 35dB
Input sensitivity (ref. 200 mV output) 0.2mV 3.5mV
Signal to noise (A weighted, with cartridge connected) 78dB 80dB
(Unweighted, with cartridge connected) 73dB 70dB
Input overload (20Hz/1kHz/20kHz) 0.8/9/84mV 10/102/950mV
Rated distortion (THD 20Hz - 20kHz) 0.03% 0. 03%
RIAA response accuracy +/- 0.3dB 0.3dB
Dimensions excl. Power supply (W x H x D) 5.3 x 1.38 x 2.75” (135 x 35 x 70 mm )
PP-2 SPECIFICATIONS
www.NADelectronics.com
NAD Electronics International reserves the right to change specifications or features without notice as design improvements are incorporated.
NAD, are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2000, NAD Electronics International, a division of Lenbrook Industries Limited. All rights reserved. No part of this publication may be reproduced, stored, or
transmitted in any form whatsoever without the written permission of NAD Electronics International.
© NAD Electronics International Printed in Canada. 12/02.