CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATIONL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8" compression fittings
OPERATION
• Loop style handle
• Temperature controlled by 100˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Spout flow is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF
61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Single-Handle Kitchen Faucet
Model: 7445 less spray
7460 with spray
Bulk Model: 67445 less spray
67460 with spray
32"
(813mm)
1-1/8" (29mm)
MAX. DECK
THICKNESS
5-7/16" (138mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-1/4"
(209mm)
IN OPEN POSITION
(261mm x 58mm)
9-1/8"
(232mm)
6-11/16"
(170mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 2/12
There is more than 1 version of this model.
Page down to identify the version you have.
