Martin Audio WSX Speaker User Manual


 
WSX
Hyperbolic folded bass horn
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2006 Martin Audio Ltd.
www.martin-audio.com
1 of 3
touring and theatre
features
7ft (2.1 metre) folded-horn subwoofer
Maximum efficiency deep bass reproduction
Mirror image stacking capability
applications
Bass ground stack for W8 and W8C
Outdoor bass line source
Contemporary dance music subwoofer
The WSX is a folded horn subwoofer which has been specifically designed to reproduce very deep bass
frequencies with maximum efficiency, speed and impact. It is intended to be used with Martin Wavefront Series
loudspeakers such as the W8 and W8C and also the W8 line array enclosures in the most demanding touring
situations where extreme levels of bass are required. It is also ideal for reproducing the concentrated bass
energy of contemporary dance music in club environments.
It features a powerful 600 Watt, 18" (460mm) driver with magnet structure and suspensions specially
engineered for very large linear excursion. The internal 'S' shaped folded horn - a Martin hallmark - is over 7
feet (2.1 metres) long and couples the driver to the airload by means of a modified hyperbolic expansion law.
This results in an efficiency typically 5dB greater than ported direct radiator sub-bass systems and contributes
to the exceptionally fast transient characteristic of the WSX.
The WSX is designed to be ground stacked and ultimate performance is achieved by close coupling a stack of
four or more WSX's mirror imaged on their sides to increase the combined horn mouth area. For large
outdoor systems, stacking mirror imaged pairs up to six or more high will form a tall line source which will
focus the bass into the audience yet retain good horizontal coverage.
The WSX is constructed from multi-laminate birch ply and is fully equipped for touring with rear castors and
bar handles.