Filter
Top Products
W8LM Mini Line Array
Mini, high performance three-way
line array enclosure
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2006 Martin Audio Ltd.
www.martin-audio.com
1 of 5
touring and theatre
features
◗ Mini three-way line array element
◗ Hybrid™ dual 8" (200mm) LF+MF configuration (-3dB@60Hz)
◗ LF+MF - 100dB @1W, 1m (single cabinet)
◗ Twin 1" (25mm) HF horn - 106dB @1W, 1m (single cabinet)
◗ Consistent 100º (-6dB) horizontal mid and HF pattern control
◗ Passive or biamp operation
◗ 12 ohm system impedance, up to 4 cabinets on one amplifier channel
◗ Fast, integral rigging system with variable splay angles
◗ ViewPoint™ array optimisation software
◗ Factory controller presets for a wide variety of configurations
◗ Compatible with W8L and W8LC line-array elements
◗ Compatible with WSX, WLX and WMX subwoofers
applications
◗ Theatre Sound Reinforcement
◗ Live Sound Reinforcement
◗ Corporate Events
◗ Fixed Installations
◗ Delay systems for large scale outdoor sound reinforcement
The Martin Audio W8LM is a mini line array enclosure designed to bring line array performance benefits to a variety
of small and medium scale applications. It meets the need for a versatile, scalable system that can be flown or ground
stacked for corporate events, theatres and indoor venues. It is also suitable as a delay system for large scale outdoor
sound reinforcement.
Following the constant directivity horn design philosophy of the W8L and the W8LC, the W8LM is a three-way
system that combines line array principles with innovative horn loading techniques to produce a next generation,
small line array with maximum dynamic impact.
Amazingly for its size, the W8LM is a full-bandwidth system (-3dB @ 60Hz) and may be used without subwoofers
in many applications. Where additional low frequency extension is required, it is ideally complemented by ground
stacked WSX or WLX/WMX Hybrid™ folded horn/reflex loaded subs. Alternatively if flown sub-bass is required
then WLX/WMX Hybrid™ folded horn/reflex loaded subs may be used.
To achieve the vertical pattern required, practical line arrays are nearly always curved in the vertical plane –
invalidating some of the simplistic ideas about wavefront curvature associated with first generation line arrays. The
acoustic elements of the W8LM have been developed to have optimal wavefront curvature characteristics for real
world situations where higher degrees of array curvature are likely.
Whilst the W8LM is a three-way system, it can be driven two-way active or entirely passively via its internal
crossover, (selected by a rear mounted switch). To make system design even more cost effective, the W8LM is a 12
ohm cabinet and up to four cabinets can be driven off one channel of a professional quality amplifier such as the
MA2.8s or MA4.2s.
The minimum number of W8LM elements in an array is 3, but most applications will require blocks of 4, 8 or 12
elements, depending on the required output capability and
vertical coverage angle.