Filter
Top Products
EE11330000
Light weight, high performance power amplifier
features
◗ Plug-in front panel module facility
◗ High frequency switching power supply
◗ Versatile input connections
◗ Dual fan 4-stage thermal control
◗ Advanced protection circuits
◗ Custom heat exchanger
◗ Dual die output devices
applications
◗ Live sound reinforcement
◗ Fixed installations
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
T
elephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2006 Martin Audio Ltd.
The E1300 features a high-frequency switching power supply,
with on-board intelligent control providing very high
performance in a lightweight 9.5kg, 2U package. This amplifier
also has a plug-in module facility located behind an easily
removable front panel section, which obviates the need for costly
stand-alone dedicated controllers in many applications.
www.martin-audio.com
overall dimensions
technical specifications
MAX OUTPUT POWER
EIA AT 1 kHz AND 1% THD
8Ω PER CHANNEL 400 W
4Ω PER CHANNEL 720 W
2Ω P
ER CHANNEL 1190 W
8Ω BRIDGED 1400 W
DISTORTION
THD 20Hz – 20kHz AND 1 W TO FULL POWER 0.08%
THD AT 1kHz 1dB BELOW CLIP 0.1%
SIGNAL+NOISE/NOISE RATIO >-100dB 20Hz-20kHz
CHANNEL SEPARATION @ 10kHz >65dB
OUTPUT IMPEDANCE 22 mΩ
SLEW RA
TE 70 V/µs
INPUT SENSITIVITY Selectable 0.775mV (36dB gain)
or 1.23V (32dB gain)
INPUT IMPEDANCE 20 kΩ differential, 10 kΩ single ended
FREQUENCY RESPONSE 7Hz–46kHz +0dB / -3dB
FREQUENCY BANDWIDTH 10Hz-40kHz +0dB / -0.5dB
FRONT PANEL
GAIN CONTROLS 2 x Rotary Control
INDICATORS: POWER ON Red LED
INDICATORS: SIGNAL LEVEL Green LED
INDICATORS: -3dB Yellow LED
INDICATORS: LIMIT Red LED
INDICATORS: BRIDGE Yellow LED
INDICATORS: THERMAL Red LED
INDICATORS: CARD ENABLE Green LED
REAR PANEL
INPUT CONNECTORS XLR-female
LINK CONNECTOR XLR-male
OUTPUT CONNECTORS 3 x 4 pole Speakon
POWER 230V Setting 115V Setting
OPERATION VOLTAGE 180-250V 90-125V
SOFT START Yes Yes
PEAK INRUSH CURRENT 11.8A 23A
MIN START VOLTAGE 140V 70V
CURRENT DRAW AT 4Ω 230V Setting 115V Setting
QUIESCENT POWER (NO LOAD) 0.9A rms 1.8A rms
1/8 OF FULL POWER (-9dB) 4.8A rms 9.6A rms
1/3 OF FULL POWER (-5dB) 7.2A rms 14A rms
DIMENSIONS
WIDTH 483mm (19ins)
HEIGHT 88mm (3.5ins) 2U
DEPTH 385mm (15.2ins)
WEIGHT 9.5kg (20.9lbs)
electronics
NOT AVAILABLE IN NORTH AMERICA