Filter
Top Products
17
VARIOUS
OPERATIONS
BASIC
OPERATIONS
BEFORE
OPERATING
ENGLISH
VARIOUS OPERATIONS
This indicates the number
of programmed steps.
The following operations can only be performed
during stop mode
<Programming an entire disc as one step>
(Disc all program)
If you skip step of the operation example, disc 2 is programmed
as step .
<Programming a pause (remote control only)>
(Pause program)
If you press 8 at step , you can program a pause. When you
press 8, “PA” appears in the display instead of the disc number.
• For example, when making a program for recording both sides
of a cassette tape, press 8 to insert a pause after programming
the tracks for one side. After turning the tape over, press 8 to
resume recording.
Notes!!
• You cannot program a pause as the first step, nor program
two pauses in a row.
• When you program a pause, it counts as 1 step and
reduces the total number of tracks you can program.
• To erase a program...
Press 7 twice during playback (or once in stop mode). You can
also erase the program by pressing MODE, RANDOM,
PREVIOUS, or SINGLE LOADER PLAY in either play or stop
mode (or by pressing BEST in stop mode).
• To cancel a program step
In stop mode, each time you press CLEAR, the last step in the
program is erased.
• If a programmed disc is missing or inserted backwards
during program play, “NO DISC” appears in the display, the
step is automatically erased, and playback proceeds to the
next step.
• Program contents are stored in memory even when the
power is turned off.
• Press the TIME/CHARA twice to check the number of steps that
have been programmed.
RENTAL DISC TRACK REMAIN MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM
SINGLE CD TEXT PREVIOUS SCAN PROGRAM
(Memory Back-Up Function)
Memorized data will be stored in memory for approx. 1 month even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount of memory used.
5
4
Notes!!
• If step is carried out before the accumulated time is
displayed, the program play starts and the time is not dis-
played.
• When UNLOAD is pressed while a program has been entered,
the disc for the 1st program step comes on the center position
and the hood opens.
• The display is not shown if the total time of the program is 100
minutes or more.
1
3