Filter
Top Products
1/6 PAGES
SRM350v2
PRECISION ACTIVE
LOUDSPEAKER
FEATURES:
■ 2-way bi-amplified, optimized powered
loudspeaker system
■ 165W RMS Class-D, Fast Recovery
™
LF amp /
30W RMS HF amp
■ 10” neodymium long-throw low-frequency transducer
with 2-inch voice coil
■ High-output precision titanium compression driver
■ Ultra-wide, smooth dispersion via HF waveguide
■ Mackie Active electronic time alignment, phase
correction and EQ for studio quality sound
■ Phase-accurate 24 dB/octave Linkwitz-Riley
electronic crossover
■ Mic/line input and pass-thru connector
■ Lightweight for ultimate portability (24 lb / 10.9 kg)
■ Asymmetrical trapezoidal cabinet for floor monitor
positioning
■ Stand / Pole-mountable
■ Flyable via optional hanging bracket kit
SRM350v2
The Mackie SRM350v2 is a full-range, portable, powered
loudspeaker system providing high-output, ultra-wide
dispersion and low-distortion performance in a compact,
lightweight design. Two Fast Recovery™ amplifiers
independently power a 10-inch neodymium woofer and a
precision titanium compression driver. Mackie’s sophisticated
Active electronics provide phase correction, crossover, time
correction, equalization and protection circuitry.
A heat-treated titanium compression driver directs pristine
highs through an exponential high-frequency waveguide,
allowing for ultra-wide dispersion. This allows the SRM350v2
to deliver clear, smooth sound to audience members up to
45° off axis.
The 10-inch neodymium woofer provides a greater magnetic
field with far less material, making the woofer extremely
lightweight without sacrificing performance. The 2-inch
voice
coil allows the driver to run cooler, delivering consistent
performance even after long hours of use.
Mackie-designed Active electronics provide equalization,
crossover, time alignment, and phase correction to
enhance sonic performance. Protective circuitry includes
over-excursion protection, low-line voltage shut-down,
thermal protection, dynamic low-frequency bass boost and
independent LF and HF limiters.
The SRM350v2 features a number of dedicated controls
including a mic/line switch, a single microphone and line
input level control, and a contour switch for low-level sound
reinforcement applications.
The center of gravity, handle locations, handle design,
position of fly-points and ease of use have been
ergonomically designed. There is also an integrated
pole mount cup and a weather-resistant steel grille. The
asymmetrical trapezoidal cabinet has been designed to
provide an ideal floor monitoring position.
The cabinet is constructed of high-pressure injected
polypropylene. The enclosure features reinforcement ribbing
and structural strengthening resulting in a strong, super-rigid
design providing ideal acoustical characteristics.
APPLICATIONS
Small club/band PA systems, houses of worship,
DJs, vocal/band monitor wedges, gymnasiums, banquet
halls, conference rooms and many, many more.