Filter
Top Products
Danish Interpretation Systems User Manual
Manual 01 18 04438
16
This setting is used to set the time from the delegate
stops talking until the microphone turns off. The
default value is 4 sec.
Auto Off Setup
This menu point has two settings:
• Auto Off
• Auto Off time
Those settings determine the behaviour of the Auto
Off facility for the conference units.
•
Auto Off
Values: {On,Off}
When set to On a conference unit will automatic
turn of the microphone when the delegate stops
talking. The time is determined by the ‘Auto Off
time’ setting.
•
Auto Off time
Values: {from 5 to 60 seconds in 5 second steps}
This setting is used to set the time from the delegate
stops talking until the microphone turns off. The
default value is 5 sec.
When the system is set to VOX mode Auto Off
settings are disabled.
Interpretation setup
The “Interpretation setup” comprises the following
entries:
• Interpreter Channels
• Language setup
• Booth Setup
• Auto Floor
• Interpreter Lock
• Channel Display
Interpreter Channels
This setting is used to set the number of Interpreter
Channels in use.
Values: {0 to 31}
When set to 0 value no interpretation channels are
present in the system. Only ‘Floor’ sound will be
present
Channel 0 will always give the original audio
(floor).
Language setup
The “Language setup” menu will show the number
of channels according to the ‘Interpreter Channels’
settings. :
A channel entry is selected with the select keys 1-4
and the language for that channel can be chosen
with the up/down buttons. If the value is changed is
indicated with “>” to the left of the entry.
The new language selection is accepted with Enter
button and cancelled with Menu button.
Booth Setup
The “Booth Setup” menu will show a list op Booth
(1 to 128).
The Interpretation Channels can now be assigned to
the Booth. More Booths can be assigned the same
channel.
As default Booth 1 is assigned Channel 1, Booth 2
assigned Channel 2 etc.
Auto Floor
When set to ON a language channel with no
interpretation will have the Floor sound.
Values: {On, Off}
Interpreter Lock
The Interlock settings are used to setup the interlock
between the Interpretation channels.
The settings are:
-Channel 1: Arabic ▲
-Channel 2: Bulgarian
-Channel 3: Danish
-Channel 4: Vietnamese
▼