Filter
Top Products
Danish Interpretation Systems User Manual
Manual 01 18 04438
13
A selection is made in the Main menu by scrolling
through the menu items with the Up/Down buttons,
and pressing the Select button associated with the
desired menu item. When scrolling through the
menu items, the Main menu wraps around the list of
menu items, i.e. passing the last menu item makes
the first menu item appear, and likewise when
passing the first menu item.
Pressing the Menu and Enter buttons does not have
any effect in the Main Menu.
Audio control
By pressing the select button for the “Audio
Control” menu adjustment of the audio levels
becomes possible:
• Loudspk volume
• LineOut volume
• Mic->Loudspk
• Mic->LineOut
• LineIn->Loudspk
• LineIn->LineOut
• LineInlevel Adj
By pressing the first select button, adjustment of the
loudspeaker volume is selected. This is indicated by
the ‘>’-indicator, and the cursor starts flashing at
the value:
The up/down buttons can now alter the value of the
loudspeaker volume. A change made to the
loudspeaker volume takes effect immediately. The
volume is changed in steps of 1 dB. The value of 0
indicates ‘standard’ setting.
Pressing the Menu or the Enter button ends change
of loudspeaker volume. Change of other audio
levels is done the same way as for the loudspeaker
volume in steps of 1 dB. All changes take effect
immediately.
The Audio Control menu comprises the following
complete list of adjustment items:
Loudspk volume
This is the Master Loudspeaker volume, the audio
level of the loudspeakers of the delegate
microphone units.
Values: {Off, -40, -39, …, -1, 0}
LineOut volume
The audio volume of the ‘LINE OUTPUT’ signal
from the CU.
Values: {Off, -40, -39, …, 19, 20}
Mic->Loudspk
Attenuation/Gain of the audio signal transmitted
from speaking delegate microphones to the delegate
microphone unit loudspeakers.
Values: {Off, -40, -39, …, 19, 20}
Mic->LineOut
Attenuation/Gain of the audio signal transmitted
from speaking delegate microphones to the ‘LINE
OUTPUT’ signal.
Values: {Off, -40, -39, …, 19, 20}
LineIn->Loudspk
Attenuation/Gain of the audio signal transmitted
from the ‘LINE INPUT’ to the loudspeakers of the
delegate microphone units.
Values: {Off, -40, -39, …, 19, 20}
LineIn->LineOut
Attenuation/Gain of the audio signal transmitted
from the ‘LINE INPUT’ to the ‘LINE OUTPUT’.
Values: {Off, -40, -39, …, 19, 20}
LineInlevel Adj
Attenuation/Gain of the XLR audio input signal
from the ‘LINE INPUT’.
Values: {Off, -40, -39, …, -1, 0}
>Loudspk volume: -7dB ▲
-LineOut volume: 4dB
-Mic->Loudspk: -10dB
-Mic->LineOut: 0dB ▼