Filter
Top Products
1000 SERIES DIGIFLEX
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
LINK ELECTRONICS, INC.
SERIAL DIGITAL DISTRIBUTION AMPLIFIER 1 X 8
DigiFlex 1175/1176
FEATURES
Serial Digital Input
Eight Serial Outputs
Fault Indication
Re-Shaped
Equalized and reclocked
Composite & Component
The LINK 1175/1176 DigiFlex serial distribution
amplifier restores the incoming signal to its proper
amplitude. The signal is reshaped with automatic
equalization, re-slicing and DC restoration. The
1175 and 1176 re-clock the input signal for
distribution over longer distance cables, up to 500
feet. Eight outputs are provided on a removable
rear cell. A module fault LED on the front edge of
the module indicates a weak signal or no input
signal present. The sensitivity of the LED indicator
may be adjusted to suit the users needs.
A module fault LED indicator on the rear cell
shows the presence of an input signal. A rear I/O
module must be selected for the specific front
signal module. The signal module and rear I/O
module with the flexibility of the frame place
virtually no limits on the versatility of the DigiFlex
1000 system.
The 1175 and 1176 input signal is composite
143Mb/s or component 270Mb/s standards. The
module has two LED's that show power supply
status and signal present. The 1176 output level
can be user adjusted between 600mV and 1100
mV. The 1175 has a fixed output level of 800mV.
The 1000 series DigiFlex modules are compact
designs that allow eleven modules to mount in the
1000 frame and ten modules with a redundant
power supply. Any 1000 series module will
operate in the 1000 frame in any configuration,
audio or video, digital/analog, generators or test
modules.
Backed by Link's 10-year warranty, the 1175/1176
will provide years of outstanding performance.
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255
MADE IN THE USA