Filter
Top Products
INSTR,INSTL,DXT-61/EC
Linear P/N: 220135 A
Material: 16 Lb. Mead Bond
Size: 8.500" x 5.500"
Ink: Black
Scale: 1-1
DXT-61/EC
PENDANT
TRANSMITTER
Operation
Instructions
R&TTE VAEE 27861 EMC, SFT, ETS
Linear Corporation declares that the apparatus DXT-61/EC
complies with the essential requirements and other relevant
provisions of Directive 1995/5/EC
DXT-61/EC FEATURES
PRODUCT DESCRIPTION
The DXT-61/EC is a battery powered, portable, miniature
pendant transmitter designed for use with Linear’s DX Format
receivers. The transmitter can be used in a limitless number of
wireless remote control applications. Pressing the button on the
transmitter sends a digitally coded wireless signal to its
companion receiver.
The digital DX code format features over a million possible codes.
Each DX transmitter is precoded at the factory to a unique code,
so no field coding is required. The transmitter can send a signal
for up to 10 seconds with each button activation.
For versatility, the transmitter code can be programmed into any
receiver channel. Receivers must be programmed to the
transmitter code before system testing and operation. DX Format
digital receivers are programmed by “Learning” the preset
factory code from the transmitter. Refer to the receiver’s
instructions for details on programming.
The DXT-61/EC transmitter is powered from a 12-Volt Type
GP-23 battery with an expected battery life of about 1 year. The
red test/operate indicator lights during operation. When the
transmitter does not function, or its range decreases, replace
the battery.
A detachable 30" neck chain is provided with each transmitter.
The transmitter button has a positive “click” feel.
DXT-61/EC OPERATION
The DXT-61/EC is a one-button, one-code transmitter. Pressing
the button sends the transmitter’s code to the receiver. Press
the button for a minimum of two seconds to insure receiver
activation.
(760) 438-7000 • FAX (760) 438-7043
www.linearcorp.com
BY
DXT-61/EC
NECK
CHAIN
PRESS BUTTON
TO SEND SIGNAL
PRESS BUTTON FOR A
MINIMUM OF 2 SECONDS
RED INDICATOR
WILL LIGHT DURING
OPERATION
BATTERY REPLACEMENT INTERNATIONAL WARRANTY
This Linear product is warranted against defects in material and workmanship for twelve (12) months.
The Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale
customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not
warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature
of the dealer’s warranty, if any. There are no obligations or liabilities on the part of
Linear Corporation
for consequential damages arising out of or in connection with use or performance of this product or other
indirect damages with respect to loss of property, revenue, or profit, or cost of removal, installation, or
reinstallation. All implied warranties, including implied warranties for merchantability and implied
warranties for fitness, are valid only until Warranty Expiration Date as labeled on the product. This Linear
Corporation Warranty is in lieu of all other warranties express or implied. For warranty service on Linear
equipment return product, at sender’s expense to:
Linear Hong Kong 19/F Hounor Industrial Centre, 6 Sun Yip Street Chai Wan, Hong Kong
Attention: Repairs Department
REPAIRS POLICY
Charges will be made for equipment that is not in warranty, shows customer abuse, or is damaged by the effects of
lightning, water, fire, or other abnormal happenings.
Customer’s equipment sent in for repair may be repaired or replaced with new or remanufactured equipment at
Linear’s discretion.
The customer is always responsible for shipping and handling charges to the repairs facility. Linear will pay return
shipping and handling charges on “in warranty” products shipped back to the customer. The customer will be billed
for the return shipping and handling charges on “out of warranty” products.
There will be a 50% expedite fee for any express requests.
The International Sales Manager must be notified prior to the return of product to Linear. All international returns
must have an International Repair Authorization number (IRA#). The number must be marked on all packages. Failure
to do so will cause delays in processing.
IMPORTANT !!!
Linear radio controls provide a reliable communications link and fill an important need in portable wireless signaling.
However, there are some limitations which must be observed.
The radios are required to comply with local rules and regulations as radio devices. As such, they have limited
transmitter power and therefore limited range.
A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that
occur on or near their operating frequencies, regardless of code settings. Changes or modifications to the device
may void regulatory compliance. Infrequently used radio links should be tested regularly to protect against undetected
interference or fault.
A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or dealer,
and these facts should be communicated to the ultimate users.
Copyright © 2002 Linear Corporation 220135 A
WHEN CHANGING THE
BATTERY, INSERT
THE NEGATIVE (-)
END FIRST
PUSH POSITIVE (+) END
INTO TRANSMITTER LAST
IMPORTANT!
TWIST CHAIN LOOPS TO
REMOVE BATTERY COVER