Linear at-fst Turntable User Manual


 
Full Height Galvanized Steel
Turnstile Series
The AT-FST full height galvanized steel turnstile series provides superior access
control through solid construction and safe design. These units are rated for outdoor
use and are hot dip galvanized finish.
This unit was developed with the installer in mind and can be assembled in a fraction
of the time it takes to install comparable industry models. Should requirements
change after installation, a user can easily change these units (that come electrically
pre-configured) from fail-safe to fail-secure.
To prevent shock and vibration from transferring through the turnstile frame, all
areas where mechanical impact occurs during normal operation (ratchets and
mechanism mounts) are insulated with shock absorbing materials. This unique
design assures a quiet and smooth operation of the turnstile and adds to the life of
all mechanical parts.
Linear does not charge extra for safety! Included with every turnstile are the
following safety features: Heel protection, Home Position centering of spindle and
Relocking timer.
AT-FST Series
• LightweightRemovableControl
Mechanism
• FieldChangeableforFailSafe
orFailSecureOperation
• OutdoorRated&EasytoAssemble
• LinearActionCentering
• ShockAbsorptionatallImpact
Points
• HingeDoorServiceAccess
• LargeBlockTerminalsforField
Connections
• 1-1/8”thickHardCoatedRatchets
with1”thickHardCoatedPawls
Barrier
80
203.2
10
25.4
Header & Cover
Spindle Arm Section
Passage Panel
(1 of 3 shown)
in
cm
134.6
in
cm
53
96
243.8
Now Part of
PRINTER’S INSTRUCTIONS:
BROCHURE,AIGIS,STEEL TURNSTILES - LINEAR P/N: 231465A - INK: 4/4: 4-COLOR PROCESS - PAPER STOCK: 80# GLOSS COVER - SIZE: FLAT: 11.000” X 17.000” FOLDED: 8.5000" X 11.000" - FINISH: 4 PAGE: WITH 3-HOLE 1/4" DRILL - SCALE: 1-1 - SIDE 1 OF 2