Line 6 headphones powered monitors Headphones User Manual


 
Line 6 GearBox 3.1 – Basic Features Guide
The destination computer lacks an Internet Connection
So you just got the call from Mr. Big Time Producer for a session at so-and-so’s studio, and you
want to bring all this great Line 6 tone along for tracking – but their computer does not connect to
the internet. You can still move your GearBox activation to their recording environment by
following these steps:
Prerequisite: This may seem obvious but we’ll mention it anyway: Your hardware and all
GearBox Software and Add-ons must already be activated and authorized on your own computer
(meaning, an Internet connection is required and has been used for the initial activation of your
GearBox assets).
On your computer:
Locate and copy all .aet files to removable media (CD, Flash drive, etc…). In Windows®
environments, these files can be found in the
C:\Document_and_Settings\(username)\Application Data\Line 6\GuitarPort folder; on
Mac®, look in /Users/(username)/Library/Application Support/Line 6/GuitarPort.
Copy the GearBox installer to removable media, since the destination computer will not be
able to download it.
On the destination computer:
Install the GearBox software.
Copy the .aet files from your removable storage into the correct folder (described above).
You may have to create this folder manually if it isn’t present.
You’re done! You should now be able to launch the GearBox application with all Add-Ons
enabled. Just remember that for Plug-in operation, your Line 6 hardware must always be
connected via USB (even if you’re using a 3
rd
-party interface).
Page 135