Line 6 headphones powered monitors Headphones User Manual


 
Line 6 GearBox 3.1 – Basic Features Guide
Note that TonePort and GuitarPort devices also offer ToneDirect
TM
Monitoring, which is a
separate audio path than what the Mac® Core Audio system routes to your audio software.
ToneDirect Monitoring allows your Gearbox processed monitor signal to function with very low
latency. Similarly, PODxt devices offer an independent, direct monitor signal as well. There are
no adjustments necessary for these monitoring systems. More information on ToneDirect can be
found in the next section.
7 – Input Source Select: This is a mirrored control for the Source Select within the GearBox
application where it allows you to select which physical input is used on the device. Note that this
control is ONLY selectable when the GearBox software is not in use by the current device. When
GearBox is in use, this selector remains grayed out, but displays the current Source that is
selected within GearBox (as shown in the example above).
When GearBox is not in use by the selected Line 6 device, this Input Source Select, like the
Source Select in the GearBox application, offers a list of input options when TonePort is the
selected device.
When GearBox is not in use, the
Input Source Select menu is
available. As shown here,
TonePort devices offer several
input Sources to choose from.
The selected Source is what gets
routed to the Device Sends.
The Device Sends Description then shows the input Source, and informs you if
that signal is “processed” or not. Since GearBox is not running, the signal is
unprocessed.
GuitarPort and PODxt devices are always “fixed” to only route their “instrument” 1 /4 input
signal into GearBox. When a GuitarPort or PODxt is the selected device, this Input Source
Select list offers only “Instrument” as the source.
8 – Device Sends info box: One line for each GearBox Record Send appears here along with a
description for exactly what signal each Send is carrying (see the description above for item #7).
TonePort devices will show two Sends (Record 1-2 and Record 3-4).
Page 124