Line 6 headphones powered monitors Headphones User Manual


 
Line 6 GearBox 3.1 – Basic Features Guide
The Device Sends Description then
shows the input Source, and informs
you if that signal is “processed” or
not. Since GearBox is not running,
the signal is unprocessed,
GuitarPort and PODxt devices are always “fixed” to only route their “instrument” 1 /4 input
signal into GearBox. When a GuitarPort or PODxt is the selected device, this Input Source
Select list offers only “Instrument” as the source.
10 – Device Sends Info box: One line for each GearBox Record Send appears here along with a
description for exactly what signal each Send is carrying.
TonePort devices will show two Sends (Record 1-2 and Record 3-4).
Single Tone Source (Mono/Stereo): When the GearBox application is not running, Record 1-
2 and 3-4 both carry the unprocessed signal. When running GearBox, Record 1-2 will carry the
fully GearBox-processed signal. For Record 3-4, you can choose between a signal with no post-
effects, and a fully unprocessed signal.
Dual-Tone Source: If you’ve selected one of the dual input configurations from the input
menu, Record 3-4 will always carry the signal from the second audio source. When GearBox is
running, these sends will carry the Tone 2 signal of a Dual-Tone configuration. See the
TonePort
Dual-Tone Operation section for more about this.
Note: TonePort DI can only run in Single-Tone configuration.
GuitarPort will show two Sends (Record 1-2 and Record 3-4). When the GearBox application
is not running, Record 1-2 and 3-4 both carry the unprocessed signal from GuitarPort’s input.
When running GearBox, Record 1-2 will carry the fully GearBox –processed signal, and for
Record 3-4 you’ll have a choice between routing a signal with no post-effects, or a fully
unprocessed signal.
*If using TonePort or GuitarPort with an audio recording software that is configured to access
TonePort via its WDM or DirectSound drivers, then only one Send will be available in the
recording software (Send 1-2). You must access TonePort via its ASIO driver on Windows to
utilize the additional Send 3-4.
PODxt will show only one Record Send (Record 1-2). The type of signal that is routed to the
Record Send 1-2 is determined by the PODxt Signal Routing option within the Audio Signal
Routing dialog (accessed by the Advanced button within the Line 6 Audio-MIDI Devices
dialog). Note that this Audio Signal Routing determines this signal routing regardless if
GearBox is running or not for PODxt devices. (See the
PODxt Audio Signal Routing section for
more about this dialog).
Page 118