Filter
Top Products
Line 6 GearBox 3.1 – Basic Features Guide
TonePort & GuitarPort - This example shows TonePort UX2 as the selected device, with the
GearBox software running. You’ll see some differences with a PODxt device selected, which are
noted in the following diagram - click on a number to go to its description…
1 2 3
4
5
6
7
8
9
10
11
12
13
1 – Line 6 Device selector: Allows selection of any supported Line 6 USB audio device that is
connected. Note that if you have more than one supported device connected, each will be
selectable in this list, regardless if it is in use by the GearBox application or not. If your device is
not connected and powered on, it will not appear in this list.
2 – Selected Device Icon: An icon for the selected Line 6 Device appears here.
3 – Driver version: Displays the current device’s installed driver version number.
4 - ESN: Displays the current device’s unique Electronic Serial Number.
5 – ASIO Client indicator: If you are running audio software that is using this Line 6 device as
its ASIO sound card, the name of the software will appear here. If not in use by an ASIO
software, “none” is displayed here as shown.
6 – Buffer Size: The ASIO buffer size in use. Note this field is only active when in use by an
ASIO application. As your audio software documentation will likely tell you, the ASIO Buffer
Size will affect the “responsiveness” and “latency” of the audio. The lower the setting, the faster
Page 116