Filter
Top Products
16 Installation
Installation
3
Resolution Setting
The unit provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Setup] menu.
1. Press SETUP.
The [Setup] menu appears.
2. Use
U
/
u
to select [Display] option then
press
i
to move to the second level.
3. Use
U
/
u
to select the [Resolution] option
then press
i
to move to the third level.
4. Use
U
/
u
to select the desired resolution
then press ENTER ( ) to conrm your
selection.
NOTE
If your TV does not accept the resolution you have
set on the player, you can set resolution to 480p (or
576p) as follows:
Press
x
(STOP) for more than 5 seconds.
Connecting TV or
components with
HDMI jack
1. Connect the HDMI OUT jack on the unit to
the HDMI IN jack on a HDMI compatible TV
or monitor. Connect the HDMI IN jack on
the unit to your components with HDMI
OUT jack using a HDMI cable.
HDMI Connection
HDMI cable
HDMI cable
TV, Monitor, etc
Blu-ray disc player,
DVD player, etc
Unit
2. Set the input source to HDMI (Page 24).