Filter
Top Products
Choosing the power sources
You can use the AC power or batteries as a power source.
Tip
The plug of the AC power
cord is polarized and only fits
one way into the wall outlet
and back of the set.
If this plug does not match
your outlet, do not force it.
Reverse it and try again.
Tip
Replace the batteries when
the Power/Batt. Lamp gets
dim or when the player stops
operating. Replace all the
batteries with fresh ones.
Before you replace the
batteries, be sure to remove
the CD from the player and
remember to check the
Battery Safety Instructions
on Page 3.
1. Connecting the AC power
cord
Insert one end of the supplied AC power cord to
the socket located at the rear of the set, and the
other end to the wall outlet.
2. Operate the set on batteries
Insert 8 size C batteries (not included) into the
battery compartment.
To operate the set on batteries, disconnect the
AC power cord from the player.
14
AC SOCKET
2. Battery compartment
1. To a wall outlet
c c
c
c
c
c
c c
LOWER
UPPER
CD-106081199 AS v.1 E