Klipsch RC-64 Speaker User Manual


 
RC-64
SPECIFICATIONS
FREQUENCY RESPONSE 62Hz-21kHz ± 3dB
POWER HANDLING 200W RMS / 800W Peak
SENSITIVITY 99dB @ 2.83V / 1m
NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQUENCY DRIVERS 1.25" (3.2cm) Titanium diaphragm
compression driver mated to 90˚x 60˚
square Tractrix
®
Horn
HIGH FREQUENCY CROSSOVER 1150Hz, 1800Hz
LOW FREQUENCY DRIVERS Quad 6.5" (16.5cm) High-output
Cerametallic
cone woofers
ENCLOSURE TYPE Sealed
HEIGHT
8" (20.3cm)
WIDTH 33" (83.8cm)
DEPTH 13.5" (34.3cm)
MOUNTING Uptilt and Downtilt feet
WEIGHT 61 lbs (27.7kg)
FINISH Cherry or Black Ash wood veneer
Quad 6.5" Center Channel Loudspeaker
Designed to be one of the most unique and
powerful center channels on the market, the
RC-64 is certainly a force to be reckoned with.
Exclusive Tractrix
®
Horns have always been the
key component of this critically acclaimed series.
In the RC-64, this technology has been refined to
include improved throat geometry for a more
genuine, lifelike sound. Behind the horn lies a
professional-grade 1.25-inch titanium diaphragm
compression driver to provide a unique
combination of precision, clarity and effortless
power.
The RC-64 employs four 6.5-inch high-output
woofers for a solid bass foundation. These
Cerametallic
woofers with inverted copper dust
caps exhibit a very high stiffness-to-mass ratio
and superb damping characteristics.
Klipsch Tapered Array
technology operates all
of the woofers at the lowest frequencies –
maintaining the high output capability necessary
for good center channel performance – but only
two operate all the way through the midrange to
where the tweeter takes over. This eliminates
acoustic interference between the woofer
outputs, a flaw in conventional speaker designs
that can severely impair sound quality at the sides
of the listening area.
The RC-64’s sealed cabinet offers improved
internal cross-bracing to minimize panel vibrations
that can color sound. Increased baffle ribbing
around the horn mouth dramatically improves
acoustics across the sonic range. For signal purity
and perfect driver integration, the crossover on
the RC
-64 features the finest components and
Klipsch custom internal wiring. Bi-wire inputs with
premium binding posts ensure superior
connectivity
.
Available in either a cherry or black real wood
veneer finish, the fully video-shielded RC-64
comes with a knife-edge back and low-diffraction,
magnetically attached grille to further accentuate
the elegance of this speaker
.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
• Ultra-high-performance center channel speaker
• Tapered Array
design for maximum dialogue clarity
• Magnetically shielded drivers to prevent video interference
• Furniture-grade wood veneer finish