Kicker hcvr12 Speaker User Manual


  Open as PDF
of 4
 
Congratulations! You have just purchased one of the most flexible subwoofers
yet from KICKER. Your CompVR sub is designed to give you great bass perform-
ance in a wide variety of applications. These installations instructions will help you
get the most out of your new KICKER sub. Thanks for buying KICKER. Enjoy!
Installation Instructions
These enclosures combine KICKER’s CompVR woofer with computer
designed and human-fine-tuned enclosures. They offer a level of bass per-
formance never before thought possible from a commercially available
enclosure. The HCVR Series enclosures are covered in carpet for protection
and pre-loaded with a CompVR woofer.
KICKER HC enclosures are engineered to provide the best bass response
when mounted in the rear hatch or trunk.
MModel
Woofer Imp. Power Top Bottom Height Width
Handling Depth Depth
(Watts) (In., cm) (In., cm) (In., cm) (In., cm)
HHCVVRR1122
C12VR *2,4 400
1100
-13/16,27.5
1144
, 35.56
1155
, 38.10
1177
-3/16, 43.66
NOTE:
*The two ohm unit should be used with the KX Series Class D amplifiers KX550.3, KX700.5, KX400.1,
and KX600.1. It is not recommended for use with any KX two or four channel amplifiers.
The four ohm unit should be used with any KX Series two or four channel amplifier. It is not rec-
ommended for use with any KX Series Class D amplifiers.
HCVR12
Sealed Enclosure Systems
REAR HATCH
or TRUNK
Move enclosure around and mount it
where it sounds best to you.
FRONT
Specifications
next