Kenwood VR-60RS Home Theater System User Manual


 
32
EN
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model_____________________ Serial Number_____________________
Specifications
Caution : Read this page carefully to ensure safe
operation.
AUDIO section
Rated power output during STEREO operation
Effective power output during SURROUND operation
FRONT (40 ~ 20 kHz, 0.7% T.H.D., at 8 one channel driven)
............................................................................... 100 W + 100 W
CENTER (40 ~ 20 kHz, 0.7% T.H.D., at 8 one channel driven)
.............................................................................................. 100 W
SURROUND (40 ~ 20 kHz, 0.7% T.H.D., at 8 one channel driven)
............................................................................... 100 W + 100 W
SURROUND BACK (40 ~ 20 kHz, 0.7% T.H.D., at 8 one channel
driven) (VR-60RS) ............................................................... 100 W
Total harmonic distortion ...........................0.05% (1 kHz, 50 W, 8)
Frequency response (IHF‘66)
CD/DVD ......................................20 Hz ~ 70 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD ................................................................................. 95 dB
Input sensitivity / impedance
CD/DVD, DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2
.............................................................................. 550 mV / 47 k
Output level / impedance
MD/TAPE REC ....................................................... 550 mV / 1 k
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 k
PRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 k
Tone control
BASS................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)
Loudness control
VOLUME at -30dB level................................... +8 dB (at 100 Hz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nm
Coaxial................................................................... 0.5 Vp-p / 75
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ................................................. 1 Vp-p / 75
COMPONENT VIDEO inputs/outputs (VR-60RS)
COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75
COMPONENT VIDEO (CB/CR-signal)...............0.64 Vp-p / 75
FM tuner section
Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity
MONO......1.3 µV (75 )/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO .....................................................28 µV (75 )/ 40.2 dBf
Total harmonic distortion (1 kHz)
MONO..........................................................0.5% (71.2 dBf input)
STEREO .......................................................0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Stereo separation (1 kHz) ........................................................... 40 dB
Selectivity (±400 kHz) ................................................................. 70 dB
Frequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range..................................... 530 kHz ~ 1,700 kHz
Usable sensitivity (30% mod., S/N 20 dB) ........ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input)
.......................................................... 50 dB (60 dBµV EMF input)
GENERAL
Power consumption .................................................................... 2.2 A
Standby Power consumption ................................... less than 0.4 W
AC outlet
SWITCHED ......................................... (total 150 W, 1.25 A max.)
Dimensions....................................................W : .440 mm (17-5/16")
H: 143 mm (5-5/8")
D: 303 mm (11-15/16")
Weight (Net)................................................................. 7.7 kg (17.0 lb)
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
100 watts per channel minimum RMS, both channels driven, at 8 from
40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)
*5573/29-32/EN 05.2.10, 10:11 AM32