Kenwood MDX-01 MiniDisc Player User Manual


 
52
EN
Maintenance of the unit
When the front panel or case becomes
dirty, wipe with a soft, dry cloth. Do not use
thinner, benzine, alcohol, etc. for these
agents may cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it
could cause a malfunction. Be specially
careful not to use contact cleaners contain-
ing oil, for they may deform the plastic
component.
Handling of discs
Disc handling precautions
Hold the discs so that you do not touch the
playing surface.
Do not attach paper or tape to either the
playing side or the label side of the discs.
Cleaning
If fingerprints or foreign mat-
ter become attached to the
disc, lightly wipe the disc with
a soft cotton cloth (or similar)
from the center of the disc
outwards in a radial manner.
Storage
When a disc is not to be played for a long
period of time, remove it from the player
and store it in its case.
Operating precautions
Caution on condensation
Condensation (of dew) may occur inside
the unit when there is a great difference in
temperature between this unit and the out-
side.
This unit may not function properly if con-
densation occurs. In this case, leave the
unit for a few hours and restart the opera-
tion after the condensation has dried up.
Be specially cautious against condensation
in a following circumsatance:
When this unit is carried from a place to
another across a large difference in tem-
perature, when the humidity in the room
where this unit is installed increases, etc.
Note related to transportation
and movement
Before transporting or moving this unit,
carry out the following operations.
(1) Remove the CD or MD from the unit.
(2) Press the 6 key of the MD.
(3) Wait for some time and verify that the
display becomes as shown in the figure.
(4) Press the 6 key of the CD.
(5) Wait for some time and verify that the
display becomes as shown in the figure.
(6) Wait a few seconds and turn the unit
OFF.
Sticky paste
Sticker
Playing side
Label side