Filter
Top Products
— 31 —
ANT.
CONT
P.CONT
FRONT • L
FRONT • R
REAR • L
REAR • R
–
+
FRONT
REAR
AUX IN
FRONT
B
C
A
FM/AM antenna input 1
Fuse (10A) 24
2 KENWOOD disc changer control input
Wiring harness
(Accessory1)25
29
White/Black
32
Gray/Black
35
Green/Black
38
Purple/Black
White
31
Gray
34
Green
37
Purple
40
To front left
speaker 30
To front right
speaker 33
To rear right
speaker 39
To rear left
speaker 36
Ignition wire (Red) 20
Battery wire (Yellow) 21
Ground wire (Black) · (To car chassis) 22
Ignition key
switch
10
Car fuse box
(Main fuse)
11
ACC 13
Car fuse
box 14
Battery
12
If no connections are made, do not let the wire come out from the tab.
A: KDC-X569/X469...Non-fading output
KDC-MP522/MPV622/MPV6022/422/4022...Rear/Non-fading output
KDC-3022/322...Rear output
B: KDC-X569/X469/MP522/MPV622/MPV6022/422/4022/3022...Front output
KDC-MPV6022...Auxiliary input
C: KDC-X569/X469...Rear output
KDC-MPV6022...Front output
To connect the Disc changer,
consult your Disc changer manual. 3
Power control wire (Blue/White) 15
Motor antenna control wire (Blue) 17
Dimmer control wire (Orange / White)
(KDC-X569/ X469/ MP522/ MPV622/
MPV6022/ 422/ 4022 only) 18
5 When using the optional power amplifier,
connect to its power control terminal.
To car light control switch
8
7 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
Connecting Wires to Terminals
External amplifier control wire
(Pink / Black) (KDC-X569/ X469 only) 43
44 To "EXT.AMP.CONT." terminal of the amplifier having
the external amp control function.
4a
KDC-X569_U.S r2 02.10.31 6:34 PM Page 31