Kenwood KA-S10 Stereo Amplifier User Manual


 
ENGLISH 5
ENGLISH
Special features
Three sets of input connectors
Important items
Maintenance
Reference
Considering connection with a portable component with a low audio output level, an analog input with high
input gain (D.AUDIO) is provided in addition to two analog inputs for ordinary desktop components (CD,
AUX).
Subwoofer output connector
A subwoofer with built-in amplifier and pin jack input can be connected to this unit.
N.B. (Natural Bass) circuit
The bass sounds can be selected from three presets featuring different amplification center frequencies and
levels according to the installation environment and size of the speakers.
Either vertical or horizontal installation
A pair of stands is provided for installing this unit vertically or on its side.
Caution on condensation
Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and
the outside.
This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the
operation after the condensation has dried up.
Be specially cautious against condensation in a following circumstances:
When this unit is carried from one place to another across a large difference in temperature, when the humidity in the
room where this unit is installed increases, etc.
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a
soft, dry cloth. Do not use thinner, benzine, alcohol, etc.
for these agents may cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a
malfunction. Be specially careful not to use contact clean-
ers containing oil, for they may deform the plastic com-
ponent.