Filter
Top Products
15
DP-R7090/R6090 (En)
To check or change the programmed tracks
1 Press the CHECK key.
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
Press until the track No. to
be changed is displayed.
CHECK
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
2 Select the disc.
DISC SELECTOR
12
3
4
5
3 Select the new track No.
12
3
45
6
78
9
0 +10
4 Set the entry.
P.MODE
To add a track to the program
1 Select the disc.
REMOTE CONTROL UNIT
RC-P0601
DISC SELECTOR
12
3
4
5
12
3
45
6
78
9
0 +10
2 Select the desired track No.
3 Press the P.MODE key.
Press to clear tracks from the end.
To clear tracks from the program
CLEAR
To clear all tracks.
P.MODE
DGP0M1 5TON2.5
Blinks.
÷Perform only step 1 to simply check the program.
÷In the case of a CD-TEXT disc, the track's title is scrolled on the display.
÷Each time the key is pressed, the program No. and the track No. on CD
are displayed.
÷Press it while the “PGM 01” indicator blinks.
÷The track being played cannot be changed.
Example
↓
÷When a track No. is selected, the track will be added to the end of the
existing program.
÷Each time the key is pressed, the last track in the program is cleared.
÷The tracks which are programmed earlier than the track being played
cannot be cleared.
÷Selected tracks can be also completely cleared just by operating the 0
key.
÷The entire program is cleared.
÷Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
Auto space function
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By record-
ing tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601