Kenwood 715S CD Player User Manual


 
loaded.
Rapid display (forward / reverse):
Press the DISC
+ or DISC button.
Pressing the DISC+
button will rapidly display the preset
names/disc titles in order.
Pressing the DISC
button will rapidly display the preset
names/disc titles in reverse order.
When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be canceled.
2
If you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
Press the DNPP button on the remote.
"DNPP" will appear in the display, and the disc name preset
play mode is entered.
The names of all the discs in the disc changer will appear
successively in the display for five seconds each.
Discs whose names have not been preset will appear as "NO
NAME" in the display.
This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
Discs in the disc changer that have never been played before
will appear as "NO ACCES" when the disc names are displayed.
When you cannot identify a disc because of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name. Also
note that "NO DISC" will be displayed when a disc has not been
NOTE
1
Disc Name Preset Play (DNPP)
Function of remote with DNPP button
connected. Please see your disc changer manual for details.
Up to 8 characters and 30 CDs can be registered with this unit.
Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
Pressing the reset button erases the disc names stored in this
unit, but does not erase names stored in a disc changer.
29
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 29