JVC KS-FX915R Cassette Player User Manual


 
9
ENGLISH
Press ¢ to tune
into stations of higher
frequencies.
F1 F2 F3 AM
(FM1) (FM2) (FM3)
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
A previously preset station is erased when a new station
is stored in the same preset number.
Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on page 8.
1
Select the band (FM1 – 3, AM).
2
Select the number (1 – 6) for the preset
station you want.
Other convenient tuner functions
(only for KS-FX815)
Scanning broadcast stations
When you press SCAN while listening
to the radio, station scanning starts.
Each time a broadcast is tuned into,
scanning stops for about 5 seconds
(tuned frequency number flashes on the
display), and you can check what
program is now being broadcast.
7 If you want to listen to that program, press the
same button again to stop scanning.
7
F1 F2 F3 AM
(FM1) (FM2) (FM3)
8 9 10 11 127
Press 4 to tune
into stations of lower
frequencies.
Manual preset
You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
Each time you press the
button, the FM band
changes as follows:
2
Tune into a station of 88.3 MHz.
3
Press and hold the number button (in
this example, 1) for more than 2
seconds.
SCAN
Selected band/preset number and
“MEMO” (memory) appear
alternately for a while.
EN07-09.KS-FX915R/815[EE]/f 00.12.12, 5:37 PM9