JL Audio 12W3v2 Speaker User Manual


 
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
W3v2 VOICE COILS IN SERIES: W3v2 VOICE COILS IN PARALLEL:
W3v2-D6: 12.0
W3v2-D4: 8.0
W3v2-D2: 4.0
W3v2-D6: 6.0
W3v2-D4: 4.0
W3v2-D2: 2.0
W3v2-D6: 4.0
W3v2-D4: 2.7
W3v2-D2: 1.3
W3v2-D6: 3.0
W3v2-D4: 2.0
W3v2-D2: 1.0
W3v2-D6: 1.5
W3v2-D4: 1.0
W3v2-D2: 0.5
W3v2-D6: 1.0
W3v2-D4: 0.7
W3v2-D2: 0.3
2 JL AUDIO 12W3v2
*Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. **Efficiency (1W/1m) is not an accurate indicator
of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. ***Re (DC resistance) is
measured with the voice coils in series,for parallel-wired specification divide Re by 4. All other specifications remain the same.
SUBWOOFER SPECIFICATIONS
WIRING OPTIONS
SUBWOOFER: 12W3v2-D2 12W3v2-D4 12W3v2-D6
Free Air Resonance (Fs): 24.3 Hz 24.0 Hz 24.4 Hz
Electrical “Q” (Qes): 0.475 0.443 0.489
Mechanical “Q” (Qms): 8.483 8.483 8.483
Total Speaker “Q” (Qts): 0.449 0.421 0.463
Equiv. Compliance (Vas): 3.65 ft
3
3.65 ft
3
3.65 ft
3
103.4 litres 103.4 litres 103.4 litres
One-way,Linear Excursion: 0.513 in 0.463 in 0.473 in
(Xmax)* 13.0 mm 11.8 mm 12.0 mm
Efficiency (1W/1m)**: 86.7 dB 86.9 dB 86.7 dB
Effective Piston Area (Sd): 81.5 in
2
81.5 in
2
81.5 in
2
0.0526 m
2
0.0526 m
2
0.0526 m
2
DC Resistance (Re)***: 3.82 7.35 10.32
Nominal Impedance: Dual 2 Dual 4 Dual 6
Power Handling (continuous): 300W 300W 300W
Mounting Depth: 6.56 in 6.56 in 6.56 in
167 mm 167 mm 167 mm
Mounting Hole Diameter: 11.06 in 11.06 in 11.06 in
281 mm 281 mm 281 mm
Driver Displacement: 0.07 ft
3
0.07 ft
3
0.07 ft
3
1.98 litres 1.98 litres 1.98 litres