JBL AVR580 Stereo Amplifier User Manual


 
16
å
Power Off: When used in the room
where the AVR580 is located, press this
button to place the unit in Standby. When
it is used in a remote room with a sensor
that is connected to the
Multiroom IR
Input
d jack, this button turns the
Multiroom system on and off.
AVR Selector: Press this button
to turn on the AVR580. The input in
use when the unit was last on will be
selected.
ç
AM/FM Tuner Select: Press this
button to select the Tuner as the input to
the Multiroom system. Press it again to
change between the AM and FM bands.
Input Selectors: When the AVR580
is off, press one of these buttons to select
a specific input and turn the unit on.
When the unit is already in use, pressing
one of these buttons will change the
input.
Tuning Up/Down – Fast Play:
When this remote is used in the same
room as the AVR580, these buttons may
be used to change the frequency of the
tuner. These buttons may also control the
Fast Play or Fast Reverse functions of
compatible CD, DVD or cassette decks in
the same room, or from a remote room
when an IR link is connected to the
AVR580.
ƒ
Record/Pause: Press this button to
activate the Record or Pause function on
compatible CD, DVD or cassette deck
products.
©
Preset Up/Down – Track Skip:
When the AVR580’s tuner is selected as
the input source, these buttons will move
up or down through the list of stations
that have been stored in the preset mem-
ory. When a CD or DVD changer or player
is selected, these buttons activate the
Forward or Reverse Track or Chapter Skip
functions.
˙
Disc Skip: Press these buttons to
change discs on compatible JBL DVD
players.
Volume Up/Down: When used in
the room where the AVR580 is located,
press this button to raise or lower the
volume in that room. When used in a
remote room with a sensor that is con-
nected to the
Multiroom IR Input d
jack, this button will raise or lower the
volume in the remote room.
Play Forward/Reverse/Stop:
Press these buttons to control compatible
CD, DVD or cassette players.
˚
Mute: When used in the room
where the AVR580 is located, press
this button to temporarily silence the
unit. When it is used in a remote room
with a sensor that is connected to the
Multiroom IR Input d jack, this button
will temporarily silence the feed to the
remote room only. Press the button again
to return to the previous volume level.
I
å
Power Off
AVR Selector
ç
AM/FM Tuner Select
Input Selectors
Tuning Up/Down – Fast Play
ƒ
Record/Pause
©
Preset Up/Down – Track Skip
˙
Disc Skip
Volume Up/Down
Play Forward/Reverse/Stop
˚
Mute
I
NOTE: The Zone II remote may be used in either the same room where the AVR580 is
located, or it may be used in a separate room with an optional infrared sensor that is
connected to the AVR580’s
Multiroom IR Input d jack. When it is used in the same
room as the AVR580, it will control the functions of the AVR580 or any compatible JBL
products in that room. When it is used in a separate room via a sensor connected to
the
Multiroom IR Input d jack, the buttons for Power, Input Source, Volume and
Mute will control the source and volume for the second zone, as connected to the
Multiroom Audio Output h jacks. (See page 39 for complete information on using
the Multiroom system.)
ZONE II REMOTE CONTROL FUNCTIONS