Filter
Top Products
9
Note: Up to two minutes may be required to pair the headset
with a Bluetooth-enabled product or transmitter for the fi rst time.
Subsequent signal searches will be quicker.
Connecting
Once the headphones are paired, they can be easily connected
to the phone via the phone’s menu system if you add them to the
“Paired Device” list. Some phones will connect automatically while
other phones will require you to go back into your Bluetooth menu
on your phone and connect. If the pairing information is deleted
from the phone, the headset must be paired with the phone again.
1. Power ON the 99003 headphones by pressing and holding the
Power button for 3 seconds. This also puts the headphones into
“Standby Mode”, allowing connection to previously paired devices.
2. Connect via your phone to the GE 99003. When you power
on the GE 99003 some phones will auto connect and other
phones will require you to go back to your Bluetooth settings
and manually connect. Please check your phone owner’s
manual for further information.
3. The blue LED Indicator on front of the left ear side blinks slowly
to indicate the connection is successful.
Reconnecting to your audio transmitter is fast and easy after the
headphones are paired with your audio transmitter the fi rst time.
They should automatically connect when you power ON both
devices.
When paired to both a phone and audio transmitter at the
same time, you can pause or mute your music while using the
phone and then go back to the music when your phone call has
ended. You can pause/resume the music playback if your music
transmitter supports AVRCP (Audio/Video Remote Control Profi le).
The music will only be muted if your transmitter does not support
this profi le. As an example, you can pause/resume playback with
the GE 99000 USB Adapter since it supports both AVRCP and