Filter
Top Products
9
Conserving Battery Power
If you don’t want to use the GE 99002 headphones, turn them off
using the power switch.
Reconnecting to Your Phone
When you power on the GE 99002 some phones will auto connect
and other phones will require you to go back to your Bluetooth
®
settings and manually connect. Please see the manual of your
phone for how to connect.
FAQs
1. How can I tell if the headphone’s battery has
insuffi cient power?
The battery power is almost exhausted when one or more of the
following scenarios occur:
a. The headphones start to reset automatically.
b. You can constantly hear breaks on the audio link about
every 30 seconds.
c. You cannot connect the headphones to any Bluetooth
®
enabled device.
2. Why can’t I create a connection to the headphones?
a. Verify that the headphone batteries are fully charged.
b. Check to see if the headphones are powered on and the LED
indicator light is on.
c. Verify that the headphones are within the specifi ed range of 30
feet (10 meters) from the audio source.
d. Check to see if any other Bluetooth
®
device is connected to the
headphones. If other devices are connected, the receiver’s status
LED indicator will fl ash slow and steady. Turn off all devices and
reconnect only those you wish to use.
e. Turn both the headphones and the audio source device off.
Power on the headphones and then power on the audio
source and try connecting again.