Filter
Top Products
6
Pairing the headset to your phone:
(Note) Before you use your headset, it must
be paired to your phone. First of all make
sure your phone and headset are fully
charged and when pairing, make sure the
phone is within a foot of the headset for error
free pairing.
1. Turn on your phone.
2. Enable the Bluetooth function of the
mobile phone in accordance to the
user manual of the phone.
3. With the headset in the off position,
press and hold the Function Button
for approximately ten seconds or
until the indicator light begins to
flash blue and red. The headset is
now ready to be paired to the mobile
phone.
4. When prompted by the phone to
enter a pin code, enter 1234.
5. When the pairing is successful, the
indicator light will flash blue.