Filter
Top Products
English
3
English
3
2
1
2
!
Thank you
Thank you for purchasing the Jabra BT330 Bluetooth
®
Headset. We hope you enjoy it!
This instruction manual will get you started and ready to make the most of your headset.
Remember, driving comes first, not the call!
Using a mobile phone while driving can distract you and increase the likelihood of an
accident. If driving conditions demand it (such as bad weather, high traffic density,
presence of children in the car, difficult road conditions), pull off the road and park
before making or answering calls. Also, try to keep conversations short and do not make
notes or read documents.
Always drive safely and follow local laws.
About your Jabra BT330
1.
Answer/end button with blue indicator light
2.
Volume control buttons
3.
Charging connector
BEFORE USING YOUR HEADSET
The Jabra BT330 is designed for simple operation with a minimum number of control
buttons. The answer and end buttons on the headset will provide alternative operation
depending on the length of time they are pressed.
Check phone compatibility
Check phone compatibility
Check phone compatibility
Check phone compatibility
1
Check phone compatibility
1
The Jabra BT330 is compatible with most Bluetooth
1
(see
Glossary
)
phones that
are compliant with the Bluetooth version 1.1 or 1.2. Visit your phone manufacturer’s
website or Jabra’s website (www.jabra.com) to make sure that your phone has Bluetooth
capability.
Charge Jabra BT330
Charge Jabra BT330
Charge Jabra BT330
Charge Jabra BT330
2
Charge Jabra BT330
2
Your headset uses a rechargeable battery that must be charged fully before you
use the headset for the first time.
1. Plug the AC charger into an electrical outlet and then into the headset’s charging
connector.
(See fig. 2)
2. Charge for 2 hours and then remove the AC charger from the headset.
3. Low battery is indicated by a flash every 5 seconds and 5 tones every 20 seconds.
WARNING
:
Do not attempt to charge the headset with anything other than the AC
charger provided. Using another AC charger may damage or destroy the headset.
IMPORTANT
:
The headset cannot be used while charging.
3
3
Read the Glossary
Read the glossary at the end of this document to familiarize yourself with important terms.
Once you have charged your Jabra BT330 you are ready to pair the headset with your mobile
phone. If the headset has already been paired with your phone, then you can begin using it.
Instruction: Duration of press:
Tap Press briefly
Tap Press briefly
Press Approx: 1 second
Press Approx: 1 second
Press and hold Approx: 5 seconds
Press and hold Approx: 5 seconds