Filter
Top Products
6
English
7
English
7
6
5
4
Wearing your Jabra BT325s
Your Jabra BT325s is designed to be comfortably worn using the integrated clothing clip
or lanyard loop (lanyard not included). The microphone is integrated on the top left side of
the device (when viewing the Jabra BT325s as shown in figure 3. A). Please take this into
account when positioning the main device to ensure a clear pickup of your voice.
(See fig. 3. B)
Listening to your music from your stand-alone music player
The Jabra BT325s realizes its full potential when used in conjunction with a stand-alone
music player. This could be an MP3-player, a portable media center or any other external
music device, featuring a standard 3.5mm stereo connector.
To use the Jabra BT325s with your music player, plug the 3.5 mm jack into the
headphone socket on your music player. You are now able to listen to your favorite
tunes whilst ensuring that you will never miss a call from your Bluetooth enabled mobile
phone.
Please note that all controls on the Jabra BT325s are dedicated for controlling your
mobile phone calls. Controlling your music, ex. start/stop, skip track forward/backward,
volume etc., must be done from your music device.
The Jabra BT325s is compatible with most stand-alone music players.
How to….
Listen to music
Plug in the 3.5mm fixed cord into your stand-alone music device. The Jabra BT325s does
not need to be turned on for listening to music.
You can also unplug the headphones and insert them directly into the music device as
regular headphones.
Answer a call
Tap the answer/end button on your Jabra BT325s to answer a call when phone is
ringing. Music will fade automatically when an incoming call comes in.
End a call
Tap the answer/end button to end an active call. Music will continue automatically after
the call.
Reject a call*
Press the answer/end button when the phone rings to reject an incoming call.
Depending on your phone settings, the person who called you will either be forwarded
to voice mail or hear the busy signal.
Make a call*
When you make a call from your mobile phone, music will fade and the call will (subject
to phone settings) automatically be transferred to the Jabra BT325s when connected.
Activate voice dialing*
Tap the answer end button and speak the name. For best results, please record the
voice-dialing tag when you are wearing the Jabra BT325s. Please consult your phone’s
user manual for more info on using this feature.
Redial last number*
Press the answer end button.
Call waiting and placing a call on hold*
This lets you put a call on hold during conversation to answer an incoming call.
• Press the answer/end button once to put the active call on hold and answer the
incoming call
• Press the answer/end button to switch between the two calls
• Tap the answer/end button to end the active conversation
Adjust sound and volume
Press the volume up or down (+ or -) to adjust the volume. (See fig. 1)
*Phone dependent
Exchanging the Jabra headphones
In order to exchange your supplied Jabra headphones with your favourite set, simply
plug your headphone jack into the headphone socket on the Jabra BT325s.
If using another set of headphones than the supplied Jabra model, please note that
differences in impedance and sensitivity might limit or increase the maximum volume
output level. An impedance level of 16 Ohm is recommended for the best performance.
However, always use extra precaution when using another set of headphones than the
original Jabra model.