Open as PDF
Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the light indicator (LED) has a solid LED light,
from any other devices as this may damage your headset.
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least
once a month.
TURNiNg yoUR hEAdSET oN ANd off
PAiRiNg iT WiTh yoUR PhoNE
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1. Put the headset in pairing mode
discoverable for your phone. When the headset is in pairing
mode the LED is constantly lit.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2050
Bluetooth is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and