Filter
Top Products
Congratulations on your purchase of an
Insignia Soundbar Home Theater Speaker
System. Your NS-SB212 represents the
state of the art in home theater soundbars
and is designed for reliable and trouble-
free performance. See your User Guide for
more information on your Soundbar
Home Theater Speaker.
Package contents
• Soundbar
• AC adapter
• RCA audio cable
• 3.5 mm audio cable
• Mounting template
• Remote control
• User Guide
• Quick Setup Guide
Setting up your soundbar
Mounting the soundbar
You can also set the soundbar on a at surface.
Quick Setup Guide
Soundbar Home Theater Speaker NS-SB212
Features
Top view Back view
Wall
16 in. (406 mm)
Approximately
¼ in. (6-8 mm)
VOL
sweNretaehTdradnatSybdnatS
DSP
BASS
Standby indicator
(Power)
button
Power
indicator
(Input)
button
DSP
button
Sound eld
indicator
BASS button
BASS
indicator
VOL +/– buttons
SUBWOOFER OUT
OPTICAL IN
DC IN
AUX IN
R
L
RCA IN
15.5V
Hanging brackets
SUBWOOFER
OUT jack
DC IN jack
RCA IN
(R and L) jacks
AUX IN jack
OPTICAL IN
jack
(Power) button
(Input) button
DSP buttons
BASS button
VOL +/– buttons
(Mute) button
Using the remote control
1 Remove the plastic tab from the battery compartment before using the
remote control for the rst time.
2 Point the remote control directly at the IR sensor on the front of the
soundbar. You must be within approximately 23 ft. (7 m) of the soundbar.
IR sensor
Remote control
To mount your soundbar on a wall:
1 Select a location close to your TV and directly in front of the
viewing/listening position. For best sound quality, choose a location
where sound waves are not blocked by furniture or other obstacles.
2 Tape the supplied wall mount template card to the wall temporarily.
The template shows you where to locate the two screw holes.
3 Drill two holes on the wall where the template indicates. The screws
should protrude from the wall approximately 1/4 in. (6-8 mm).
4 Secure two screws (not included) to the wall in the holes you just
drilled. The screws must protrude from the wall by about 1/4”. The
screw width must about 3/16” and the screw head about 1/4" to 3/8".
Warning: Improper installation can result in serious injury or damage to
your soundbar. If necessary, seek the assistance of a professional.
Cautions:
• You must use suitable wall anchors if you are mounting on drywall,
concrete, or other wall types.
• If the soundbar is not mounted securely, there is a possibility that it
could fall.
5 Align the speaker hanging brackets with the screws, then hang the
soundbar on the screws.
Note: You must use suitable wall
anchors if you are mounting on
drywall, concrete, or other wall types.
C
M
Y
CM
MY
CY
CMY
K
NS-SB212_12-0161_QSG_V1_EN_final.ai 1 3/15/2012 9:41:31 AMNS-SB212_12-0161_QSG_V1_EN_final.ai 1 3/15/2012 9:41:31 AM