Icom IC-R1500 Radio User Manual


 
48
10
OTHER FUNCTIONS
10
The internal switch must be set properly to use an external
speaker, headphones or earphone.
Before removing the top cover, turn the receiver power
OFF, then disconnect the DC power cable.
qTurn the power OFF, then disconnect the DC power cable.
wUnscrew the 8 screws and disconnect the connected ca-
bles, then remove the top cover.
• Be careful not to lose the screws.
eSet the switch as shown at right.
• Set the switch to [SPEAKER] when an external speaker is con-
nected to the receiver. (default)
• Set the switch to [PHONES] when headphones or an earphone
are/is connected to the receiver.
rReturn the top cover, cables and screws to the original po-
sition.
SPEAKER
PHONES
switch
Top cover
Power switch
Internal audio switch