Icom IC-R1500 Radio User Manual


 
7
2
PANEL DESCRIPTION
qANTENNA CONNECTOR [ANT]
Connects a 50 antenna with a BNC connector and a 50
coaxial cable.
wPACKET JACK [PACKET]
Connects a TNC (Terminal Node Controller), etc. for data
communications. The receiver can support 9600 bps
packet communication (AFSK).
eUSB CONNECTOR [USB]
Connects to a PC via the supplied USB cable.
No connection is necessary when the IC-R1500’s controller is in
use.
CAUTION: NEVER insert any other object than a USB
cable, such as a metallic object, otherwise the Main unit
may be damaged.
rEXTERNAL SPEAKER JACK [EXT SP]
Connects an 8 external speaker.
• Audio output power is more than 0.5 W.
tCONTROLLER [CONTROLLER]
Connects to a controller via an extension cable.
• No connection is necessary when the control software is in use.
CAUTION: NEVER insert any other object than the con-
troller cable, such as a metallic object, otherwise the
Main unit may be damaged.
yPOWER JACK [DC IN]
Accepts 12 V DC ±15% via the supplied DC power cable.
uGROUND TERMINAL [GND]
Connect this terminal to a ground.
Front
Top
Rear
Power switch
Speaker
qwer
u
y
t
2-conductor 3.5 (d) mm (
1
8˝)/100 k
PACKET jack connection
2-conductor 3.5 (d) mm (
1
8˝)/8
EXT SP jack connection
AUDIO
GND
AUDIO
GND
Rear panel—main unit