Open as PDF
Thank you for purchasing a Harman Kardon CP 35 Home Theater System. This
Quick-Start Guide will help you with a basic system installation. For detailed
information on any step in this Guide, please refer to the pages referenced in
the Owner’s Manual for the AVR 335, which is part of this system. We strongly
recommend that you read all four Owner’s Manuals for complete details on
how to install, configure and operate the AVR 335, DVD 31, HKTS 14 and
HKS 4, as well as for the important safety information they contain. You should
also read the Owner’s Manual for the included RCP 2 system remote.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the back
of the AVR 335 (see page 7).
Step 1. Place your speakers in the listening room
(see page 16).
CP 35 QUICK-START GUIDE
Connections Color Guide
Audio Connections Left Right
Digital Audio Connections
Match the colored jacks on the AVR 335 to the appropriate
jacks on your source equipment or speakers
The colors are
standardized, but not all equipment or connectors use them.