22
22
Figure 25 – Remote Battery Compartment
When using the remote, point the lens toward the front panel of
the HK 3490. Make sure no objects, such as furniture, are blocking
the remote’s path to the receiver. Bright lights, fluorescent lights and
plasma video displays may interfere with the remote’s functioning.
The remote has a range of about 20 feet, depending on the lighting
conditions. It may be used at an angle of up to 30 degrees to either
side of the HK 3490.
If the remote seems to operate intermittently, then make sure the batteries
have been inserted correctly, or replace the batteries with fresh ones.
Step Ten – Turn On the HK 3490
Place the HK 3490 in Standby mode by turning on the Main Power Switch
on the rear panel. The Power Indicator will turn amber. The HK 3490 may
be turned on from Standby mode by pressing the Power Switch or any
Source Selector on either the front panel or the remote. See Figures 26
and 27.
Figure 26 – Front-Panel Power Switch
Figure 27 – Remote Control Power Switch
INSTALLATION
HKP1696-3490.qxd 4/22/08 3:37 PM Page 22