Open as PDF
Thank you for purchasing a Harman Kardon CP 25 Home Theater System.
This Quick-Start Guide will help you with a basic system installation. For
detailed information on any step in this Guide, please refer to the pages
referenced in the Owner’s Manual for the AVR 235 that is part of this system.
We strongly recommend that you read all four Owner’s Manuals for complete
details on how to install, configure and operate the AVR 235, DVD 22, HKTS 7
and HKS 3, as well as for the important safety information they contain. You
should also read the Owner’s Manual for the included RCP 2 system remote.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the back
of the AVR 235 (see page 7).
Step 1. Place your speakers in the listening room
(see page 16).
CP 25 QUICK-START GUIDE
Connections Color Guide
Audio Connections Left Right
Digital Audio Connections
Match the colored jacks on the AVR 235 to the appropriate
jacks on your source equipment or speakers.The colors are
standardized, but not all equipment or connectors use them.