Filter
Top Products
2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
5 Front Panel Controls
7 Front Panel Information Display
9 Rear Panel Connections
11 Main Remote Control Functions
14 Zone II Remote Control Functions
15 Installation and Connections
19 System Configuration
19 Speaker Selection and Placement
20 First Turn On and Use of OSD
20 Settings to be Made With
Each Input Used
21 Input Setup
21 Surround Setup
22 Speaker Setup
23 Adjustments for Other Inputs
23 Making Settings independent of selected
Input
23 Delay Settings
24 Night Mode Settings
24 Output Level Adjustment
25 Using EzSet
25 Manual Output Level Adjustment
27 Operation
27 Basic Operation
27 Source Selection
27 Controls and Use of Headphones
28 Surround Mode Chart
29 Surround Mode Selection
29 Digital Audio Playback
31 Tape Recording
32 Output Level Trim Adjustment
33 6-Channel Direct Input
33 Memory Backup
33 Tuner Operation
34 RDS Operation
36 Advanced Features
36 Display Brightness
36 Turn On Volume Level
37 Semi OSD Settings
37 Full-OSD Time Out Adjustment
38 Multiroom Operation
39 Programming the Remote
39 Programming the Remote with Codes
40 Code Readout
40 Learning Codes From a Remote
41 Macro Programming
42 Programmed Device Function
42 Volume Punch-Through
43 Channel Control Punch-Through
43 Transport Control Punch-Through
43 Reassigning Device Control
Selectors
43 Resetting the Remote Memory
44 Function List
46 Setup Code Tables
56 Troubleshooting Guide
56 Processor Reset
57 Technical Specifications
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
1
– (number in a square) indicates a specific front-panel control
0
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
A
– (letter in a square) indicates an indicator in the front-panel display
å
– (letter in an oval) indicates a button on the Zone II remote
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described in
this owner’s manual is in compliance with technical stan-
dards:
EN 55013/6.1990
EN 55020/12.1994
EN 60065:1993
EN 61000-3-2/4.1995
Carsten Olesen
Harman Kardon Europe A/S
11/00