Open as PDF
Zone 2 Remote Control Functions
I Sleep Button: Press this button to place
the unit in the Sleep mode. Each press of the
button selects the amount of time that will
remain before the unit will automatically go into
the Standby mode, as shown in the Main Infor-
, in the following order:
Holding the button pressed for some seconds
will directly turn off the Sleep time selection.
J Settings Info Button: Open the Settings
Info Menu for any Source with this Button.
K Menu Button:When using a H/K DVD
player with the receiver, you can activate the
DVD Menu with this button.
L OK Button: This button confirms settings
and orders in the menus.
M Zone Select Buttons: Press the Select
Button to switch the Zone 2 Remote Control
between Zone 1 function (The white Button
lights up green) or Zone 2 function (The white
Button light up red).
14 ZONE 2 REMOTE CONTROL FUNCTIONS