Filter
Top Products
SYSTEM CONFIGURATION 29
Once the settings outlined on the previous pages
have been made, the AVR is ready for operation.
While there are some additional settings to be
made, these are best done after you have had an
opportunity to listen to a variety of sources and
different kinds of program material.These
advanced settings are described on pages 37 to
38 of this manual. In addition, any of the
settings made in the initial configuration of the
unit may be changed at any time. As you add
new or different sources or speakers, or if you
wish to change a setting to better reflect your
listening taste, simply follow the instructions for
changing the settings for that parameter as
shown in this section.
Note that any settings changed at any time, also
when the discrete buttons are used only, will be
stored in memory in the AVR, also if it´s turned
off completely, unless it will be reset (see page
46).
Having completed the setup and configuration
process for your AVR, you are about to
experience the finest in music and home-
theater listening. Enjoy!
System Configuration