Filter
Top Products
• Massive heat sinks for silent convection cooling
• High current power supply design with massive torrodial transformer
• Quad mono power supply
• New, linearized pre-driver stage circuit
• Remote turn on/turn off circuitry with automatic sequencing
Unpacking and Installation
The carton and shipping materials used in protecting your new amplifier were spe-
cially designed to cushion it from the shocks and vibration of shipping. We suggest
that you save the carton and packing materials for use in shipping if you move or
should the unit ever need repair.
To minimize the size of the carton in storage, you may wish to flatten it. This is
done by carefully slitting the tape seams on the bottom and collapsing the carton
down to a more two-dimensional appearance. Other cardboard inserts may be
stored in the same manner. Packing materials that cannot be collapsed should be
saved along with the carton in a plastic bag.
In order to assure a high level of performance and long life, the Citation 5.1 has
been engineered from robust materials. This weight, however, requires, that you
pay special attention to unpacking and installation of the unit. First, you may wish
to have someone help you remove the unit from its carton and place it in the prop-
er location. In addition, when moving the amplifier, be careful not to set it down
on the heat sink edges to avoid damage to their surface or finish. Similarly, be care-
ful to avoid scratching any contact surface with the heat sinks, as their edges may
be sharp.
Make certain that any shelf or stand is capable of supporting the weight of the
amplifier. This is particularly true if you will be stacking multiple amplifiers on the
same shelf.
When positioning the amplifier in its final location, make certain that it has ade-
quate ventilation on all sides, as well as on the top and bottom. Do not place CDs,
record jackets, owner’s manuals, or other paper, on top of, or beneath the unit, or
between multiple amplifiers in a stack. This will block air flow, causing degraded
performance and a possible fire hazard. If the unit is to be enclosed in a cabinet or
rack, make certain that there is adequate air circulation, with a means provided for
hot air to exit, and for cool air to be brought in. In some instances, a fan may be
required for this purpose. If you are in doubt as to the ventilation requirements,
please consult with your dealer or installer.
When stacking multiple Citation 5.1 amplifiers in a rack or cabinet, place the unit
which will power front and/or center channel speakers at the bottom of the stack.
Next, place the amplifier used for surround speakers in the center. The unit which
will be used to power subwoofers should be at the top of the stack.
7