Filter
Top Products
8
Dolby Pro Logic
(Non-Digital) – Speaker Level
USE THIS INSTALLATION METHOD FOR
DOLBY PRO LOGIC APPLICATIONS (NOT
DOLBY DIGITAL, DTS OR
OTHER DIGITAL
PROCESSING),WHERE THE RECEIVER/
PROCESSOR DOES NOT HAVE A SUB-
WOOFER OUTPUT,OR A VOLUME-
CONTROLLED PREAMP (LINE-) LEVEL
OUTPUT:
Connect your receiver or amplifier’s front
left and right speaker terminals to the left
and right terminals on the subwoofer that
are marked “Speaker-Level Input.” Connect
the left and right terminals on the sub-
woofer that are marked “Speaker-Level
Output” to the corresponding terminals on
the back of your front left and right speakers.
Connect your receiver or amplifier’s center,
and left and right surround-speaker
terminals to the corresponding terminals on
the back of your center, and left and right
surround speakers.
Right Front
Left Front
Left Surround Right Surround
Center
L
L
Speaker-Level
Input
Subwoofer
High Level
Left Front
Left Surround
Center
Right Front
Right Surround
Receiver
Speaker-Level
Output
R
R
– + – +
– +
– +
– +
– +
– +
– + – +
SPEAKER CONNECTIONS (continued)SPEAKER CONNECTIONS (continued)