Electro-Voice ND6-16 Speaker System User Manual


 
Technical Specifications:
The Electro-Voice ND6 is a world-class high-frequency
compression driver capable of extremely high acoustic output
over a wide frequency range.
Precise engineering, along with careful selection of materials
and advanced driver architecture, has resulted in a driver
that is ideally suited for the most demanding presentation of
high quality music and communications program.
Incorporating Electro-Voice’s exclusive Ring Mode
Decoupling (RMD) through all design phases has produced
drivers with unmatched accuracy while minimizing acoustic
resonances and time domain ringing throughout the driver
structure.
The resulting small size and weight-to-power ratio of the ND6
assures easy installations where weight may be a concern.
The 2.15 Tesla flux density provided by the Neodymium
magnet exceeds that of conventional drivers at a fraction of
the size.
A unique, geometrically optimized 3" titanium diaphragm,
consisting of a one-piece dome and suspension system gives
these drivers an ideal combination of superb high-frequency
response and resistance to fatigue.
Integrated into the ND6’s design is a finned aluminum heatsink
to increase power handling and reliability.
8-6DN61-6DN
:ecnadepmIlanimoNsmho8smho61
:ecnadepmImuminiMzHk6@smho7smho41
:ecnatsiseRCDsmho5.4smho01
:esnopseR.qerFzH000,02-0001
yticapaCrewoP
1
:.gorP.tnoCsttaW051,sttaW57
revossorCdednemmoceR
2
:rehgihrozH0001
:ycneiciffElanimoN%82
leveLerusserPdnuoS
3
:
)reteM1@ttaW1(
nroH024PH,Bd411
nroH046PH,Bd211
nroH049PH,Bd011
:retemaiDtaorhT)mm53("83.1
:retemaiDlioCecioV)mm57("3
:eriWlioCecioVnobbiRmunimulAeruP
:noitcurtsnoCmgarhpaiDdnaemoDmuinatiTeruPmm50.0
dnuorruS
:noitcennoClacirtcelEforiapastpeccA(slanimreTwercS
seriWAG21
:ytiraloPlanimreTevitisoPotegatloVevitisoP
citsuocAevitisoPasecudorP
erusserP
:ytisneDxulFalseT51.2
:)hcae(thgieWteN)gk5.2(sbl5.5
:thgieWgnippihS)gk0.3(sbl5.6
General Description:
ND6-8/ND6-16
3-Inch High Frequency
Neodymium Transducer
Key Features:
Extremely high acoustic output
Geometrically optimized titanium diaphragm
Very high sensitivity and reliability
Neodymium magnet provides unprecedented
output to size ratio
Compact, rugged and light weight
1.4" exit diameter
2.0” exit diameter with ADH-6 adapter
Die-cast aluminum heatsink
1
Power capacity per AES standard. Continuous pink noise with a 6 dB crest factor, 2 hours.
2
For applications below 1000 Hz, use ND6x.
3
Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1000 - 5000 Hz
and calculated to 1 Meter equivalent by inverse square law.