Filter
Top Products
DMX BOOSTER
1 2 3 4
DMX OUT
DMX OUT
DMX IN
1 2 3 4
LinkOut
Terminate
1=Ground
2=Data-
3=Data+
4=Notused
5=Notused
1=Ground
2=Data-
3=Data+
0V
120Ω
1
2 4
5
3
1
2
3
POWERINPUT:120V~60Hz
INTERNALFUSE:
F100mA250V5x20mm(5Pcs)
DMX-BRANCHX4
CAUTION
RISKOFELECTRICALSHOCK
DISCONNECTINPUTPOWER
BEFOREOPENING
WARNING:THISAPPARATUSMUSTBEGROUNDED
User Instructions
Elation Professional
4295 Charter Street
Los Angeles Ca. 90058
www.elationlighting.com
Optional 5-pin
XLRs Available
Introduction:
Thank you for purchasing the Elation DMX-Branch/4.
™
To optimize the
performance of this product, please read these operating instructions
carefully to familiarize yourself with the basic operations of this unit.
The Elation
® DMX-Branch/4
™
is DMX signal splitter/booster combina
-
tion. This unit has been tested at the factory before being shipped to
you, there is no assembly required.
Customer Support:
Elation® provides a customer support line, to provide set up help and
to answer any question should you encounter problems during your
set up or initial operation. You may also visit us on the web at www.
elationlighting.com for any comments or suggestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m.
Pacific Time.
Voice: (323) 582-3322
Fax: (323) 582-3108
E-mail: support@elationlighting.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest Elation dealer.
Protect our environment, do not discard this cartoon in the trash. Please
recycle when ever possible.
Introduction
©Elation Professional® www.elationlighting.com DMX-Branch/4™ Instruction Manual Page 2
Rev. 12/04