Filter
Top Products
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email info@eaw.com • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
THX is a registered trademark of Lucasfilm Ltd.
CINEMA SERIES
APPLICATION
• For the largest cinema screen channel applications
• THX-Approval pending
PRODUCT INFORMATION
The CSC923 represents a major advancement in cinema screen
channel speaker design. Incorporating many new EAW engineering
breakthroughs, the CSC923 is designed to provide optimal coverage
in “stadium” seating auditoriums, where front-to-back coverage
provides a difficult challenge for even the best conventional
systems.
The three-way CSC923 features a multicomponent modular design
which allows quick installation, with little or no assembly required
on site.
The mid-range and high frequency horns feature an unusual asym-
metrical flare design, which provides a narrow pattern at the rear of
the room, and a wider pattern at the front of the room. This design
minimizes energy radiated at the side walls, while concentrating
sound in the seating area. The high frequency horn is coupled to a
2-inch exit driver, and also features a controlled collapsing pattern
at the very highest frequencies, which compensates for the screen’s
effect of widening the pattern, thus resulting in a constant pattern
in the seating area.
The single 10” mid-range cone driver is housed in its own subenclosure
and is coupled to EAW’s patented “VA
4
” phase plug. The unique
radial design of the VA
4
phase plug significantly reduces throat
distortion and frequency “time smear”, resulting in noticeably
clearer, more natural sounding dialog.
The dual low frequency sections incorporate EAW’s “push-pull” driver
arrangement. Each driver pair is out of phase relative to each other
both physically and electrically, yet their product is acoustically in
phase, substantially lowering mechanically induced distortion.
Technical Specifications CSC923
DESCRIPTIVE DATA
LF Subsystem 4x15” Vented, Push Pull Configuration
MF Subsystem 1x10-in Horn-Loaded Cone, Radial Phase
Plug
HF Subsystem 1x2-in Exit/75mm Voice Coil Compres-
sion Driver on 2 Axis Asymmetrical Horn
Configuration 3-way
Powering Mode Tri-amplified
Enclosure Materials Baltic Birch Plywood
Finish Wear-resistant Textured Black Paint
Connectors 2x2-Terminal Barrier Strip
Dimensions
Height 90.5 in 2298.7 mm
Width 32.0 in 812.8 mm
Depth 22.5 in 571.5 mm
Weights
Net 309.0 lb 140.16 kg
Shipping 329.0 lb 149.04 kg